The smartphone manufacturer Nokia periodically releases firmware updates designed to improve the performance of smartphones. At first glance, it will seem that this is a complex operation. But this is not so: every owner of a Nokia smartphone is able to independently perform its firmware.
Instructions
Step 1
When you start flashing a Nokia smartphone, you should take into account that there are a series of Nokia phones (6630, 6680, 6270, 3250, N70, N90) that cannot be flashed without a phisher.
Step 2
To do this, first of all, you need to find out which version of the firmware is indicated in your smartphone, for this you need to dial * # 0000 #. Then download to your computer exactly the firmware that is designed for your phone.
Step 3
The next step is to download programs Diego_3_06, Phoenix 2004 and Crack for Phoenix. During installation, an error message may appear on the screen, open two windows: error messages and the installation of the Crack.exe file, then click on the "Try again" button and continue installing the Crack.exe program, while replacing the files, if any need. All this will need to be done very quickly, since the error may appear again.
Step 4
The next step is to restart your computer. After rebooting, you need to start the Phoenix 2004 program, then minimize it, but do not close it, and start the installation. Experts recommend that you do not restart your computer at the end of the installation under any circumstances.
Step 5
Then you need to install the cable driver DKU-2, thanks to which it becomes possible to enter the following folders: C: Program FilesCommon FilesNokiaTssCdmaCommon and C: Program FilesCommon FilesNokiaTssFlash. Be attentive to every step, otherwise you can ruin your phone.
Step 6
Take out the memory card from the phone and format it. It is also necessary to charge the phone battery. After all the actions done, you must click on "Start" and wait. Various information will appear in the program window regarding the flashing of a Nokia smartphone. However, nothing needs to be touched. If you receive a message that the phone is in Test mode, then enable this mode and close this message.
Step 7
If everything is done correctly, you will receive an email stating that the firmware update was successful. After flashing, you should reboot and format the phone.
