If there is a need to install another telephone in the house, you can quickly and inexpensively make a parallel connection.
Necessary
socket, knife, screwdriver
Instructions
Step 1
Any telephone can be connected in parallel with an analog device. When installing a parallel telephone, both devices will have the same number, and from either of them it will be possible to make or answer calls. In order to install a parallel telephone set, you need to purchase a special socket, which consists of a plug and a housing. Connection work is done in the following order:
Disassemble the socket by unscrewing the connecting screw and strip the ends of the telephone wire.
Step 2
Connect the telephone line to the chassis. The connection is made to two sockets on the right side of the case (if you position the socket so that the fifth contact is at the bottom).
Screw the bottom of the case to the floor and then reassemble the case by screwing in the fixing screw.
Disassemble the plug and look at the wiring diagram for the wiring pins and pins. Connect the outlet exactly according to this recommendation.
Step 3
Attach the pins and check for a signal on the telephones. If there is a signal, it means that the socket is installed correctly. If there is no signal, try other connection options.
Step 4
When installing a socket for parallel telephones, you should take into account the presence of a computer in the house. If there is one, then a splitter must first be installed in front of the outlet, which will exclude the possibility of reducing the speed of the computer. For better communication, the impossibility of listening to a conversation from another phone, a blocker is installed. Modern technological developments offer a wide range of other accessories.
