How To Disassemble Samsung Scx 4100 Printer

Table of contents:

How To Disassemble Samsung Scx 4100 Printer
How To Disassemble Samsung Scx 4100 Printer

Video: How To Disassemble Samsung Scx 4100 Printer

Video: How To Disassemble Samsung Scx 4100 Printer
Video: Samsung SCX-4100 does not take paper / capture roller Replacement | complete disassembly 2024, March
Anonim

It is best to entrust the disassembly of the printer, like other devices, to the specialists of service centers if you do not have the skills to repair copying equipment. However, if you are confident in your abilities, you can do it yourself.

How to disassemble Samsung scx 4100 printer
How to disassemble Samsung scx 4100 printer

It is necessary

Screwdriver

Instructions

Step 1

Disconnect the device from the power source, open the top cover and remove the cartridge, remove the power cord and the cable for connecting the printer to the computer. Set the switch so that it does not interfere with the removal of the printer wall.

Step 2

Turn the device over and unscrew the screws on its back using a Phillips screwdriver, this model has 4 screws. Do the same with the screws on the fuser. When removing it from your printer, be very careful not to break the paper exit sensor.

Step 3

Raise the area of the scanner so that the special fasteners are exposed, flip them off in order to remove one of the side covers of the device. Be careful, these mounts are not entirely secure.

Step 4

Do the same on the other side. After removing all the walls, you should see the gearbox block, unscrew the mount and remove the device. Fold the screws from certain parts of the printer separately so as not to damage the threads in the future.

Step 5

Remove the laser scanner, disconnect the feeders. The best practice is to clean the inside of the printer. This is especially necessary if a large number of pages have been printed. Toner residues may also be present in the cartridge. Reassemble the printer in reverse order.

Recommended: