Satellite television makes it possible to watch a huge number of both Russian and foreign channels. To do this, you just need to correctly configure the receiver (a device that transmits a signal from the satellite to the TV) and enter the channel codes.
It is necessary
- - television;
- - receiver;
- - channel keys.
Instructions
Step 1
Decode the channels of the Globo and Orton receivers. To do this, go to channel 9339, go to the Key menu, in the appeared window with encodings, select BISS, click "OK". Then you will see the following inscription - Provider Tire inde Key Data. Press the green button to add or the red one to edit. Edit the non-working key, you will see the following: Freg Tire Key Data, enter 2600 00198C 12073 then KEY8 1A2B3C004D5E6F00. Click "OK", save the key and exit the menu.
Step 2
Go to any channel if you want to decode a satellite channel on the OPENBOX 800 receiver. Go to the menu, 1117, then a window with encodings will open, select BISS, click "OK". You will see the inscription Vidio Key. Select a non-working key, or an empty cell, click the red button to edit, enter the key twice.
Step 3
Click “OK” to save the key, then “OK” again to activate the key. The line with the key will be highlighted in blue. Click "OK" and exit the menu. Satellite channel decoding is completed.
Step 4
Follow these steps if you have an OPENBOX X or 1700, F-100 version. Also, these settings are suitable for POWERSKY8210, ARION, Lemberg receivers. Turn on the built-in emulator if there is a $ sign in the full name of your receiver. To do this, go to the menu, type the numbers 19370, in the box that appears 2486. Select the "Games" item, start the emulator.
Step 5
Press "Menu", go to the "Games" item, then select the Hex Edit option, dial 0000, set the required encoding. In the general list, find the provider's identification code, in the tuner it may look like V 00010C10. Select the key number, then press the red button to edit. Lower the cursor to the key, click "OK". Type in a working key. After you have entered all the numbers, press Exit on the tuner remote control. Click "OK" in the window that appears, then Exit.
