How To Rip

Table of contents:

How To Rip
How To Rip

Video: How To Rip

Video: How To Rip
Video: Beginner surfing progression | One Day At The Wave Pool 2024, May
Anonim

Ripping is the process of extracting information from a video / audio medium into a file. Usually the rip source is DVD, video tape, or streaming. Rip is created to turn awkward storage and playback formats into files that are less dependent on playback devices.

How to rip
How to rip

Instructions

Step 1

Download and install the XviD4PSP 5.0 ripping application on your computer. You can download it from the following link https://www.winnydows.com/#Downloads. Run the program. If you need to rip from a video file, select the "Open" command, if from a disc - DVD. In the next window, select the desired material, click "OK".

Step 2

Select an audio track, there are usually several on a DVD disc. If you need to create a small rip, select a 2-channel track, if the rip will be 1, 4 GB or more, then you can select multichannel tracks. When joining a track, keep in mind that its bitrate should not exceed 40% of the video bitrate.

Step 3

Run Notepad, paste the code from the following page into it: https://streamzone.ru/videouroki-i-obuchayushhie-interaktivnye-dvd/bez-kategorii-5/17029-kak-sdelat-pravilnyj-rip-s -pomoshhyu-programmy.html. Save this file to the XviD4PSP5 / presets / encoding / AVI Hardware / video program folder under the name 1460.

Step 4

Go to the rip settings, set the following parameters: file format - avi, filtering - set Disabled, in the "Color correction" item set the value MPEG2fix. To encode the video, select the file created in the third step. In the "Audio encoding" item, set the AC3 format, if you create a rip of 1, 46 GB or more, if 745 Mb or less, then set the mp3 format.

Step 5

Select "Video", then "Resolution / Aspect". In the window that opens with the settings, set the final resolution to 720. If non-zero values are set in the "Cropping" menu item, add them, subtract from 720 and set the resulting value. Next, go to the "Encoding parameters" item. The value of the "Quality" parameter should be around 0.22 - 0.25. If this figure is less, go back to the previous item and reduce the resolution of the video file.

Step 6

Pay attention to the following points when creating a rip: the resolution of the video file should not be more than 720 pixels wide, keep the correct aspect ratio. Their multiplicity should be 16. Note that the video bitrate should not be more than 2400.

Recommended: