Some models of mobile phones from Sagem have a useful feature - blocking access to the phone when switched on. To start working with the device, you must enter a special code. But if you lose this code, it is rather difficult to access the phone functions.
Necessary
- - Sagem phone;
- - SagI Maker software;
- - usb cable.
Instructions
Step 1
Sagem phones, unlike mobile devices from other manufacturers, have significantly changed the access system. The required code is entered every time you change the sim card or battery, similar to entering a pin code. Usually a person sets the code, confirms it and happily forgets about it. When buying a new sim card, i.e. when changing it, the phone asks to enter the code. To bypass your phone's security, install Sagem Maker.
Step 2
Then connect your phone to your computer or any portable device. Use a special cable, one plug of which is connected to the phone, the other to the USB connector on the computer. When connected, the connection selection menu will appear on the phone screen. Choose any of several options, because the program only needs a connection.
Step 3
When connected, your phone is assigned one of the com ports. Your task is to make sure they match. To unblock it, you need to connect through ports whose numbers are from 1 to 4. You can find out the port number through the "Device Manager". Right-click on the My Computer icon and select Properties. In the window that opens, click on the "Hardware" tab and press the corresponding button.
Step 4
In the Task Manager window, review all open ports. If a port is assigned to the phone, the number of which is outside the indicated limits, therefore, it must be switched. Disconnect the device from the computer to reconnect. Choose another mode, for example, connect as a modem. Check the correctness of the port again in the device manager and then you can proceed to unblocking.
Step 5
Run the program installed on your computer. Go to the Connect block in the main window and select the desired port, which will correspond to the real one. Now press the Read Phone button and the forgotten code will be displayed in the User cod field.
