Anyone's phone can fall into the water. It is important to know how to bring your machine back to life.
1. Disable. After you have taken the phone out of the water, you must turn it off immediately. Otherwise, a short circuit will be broken.
When the device is pulled out, do not shake it, as water may penetrate even deeper into the device. If you have the ability to immediately remove the battery from the phone, do so immediately. If this cannot be done at the moment, just turn off the power.
If the phone turns off when dropped, do not turn it on again to check its functionality. Now you can forget about your phone for a couple of days.
2. Disassemble. You need to remove all the detachable parts of your phone: memory card, back cover, SIM card, headphone jack, etc. The main thing here is not to overdo it. Remember that your wet phone needs as much air as possible, and that requires holes.
3. Vacuum clean. If your vacuum cleaner has a narrow tip nozzle, then this is the time to use it. Try to remove as much moisture from your phone as possible. It is advisable to vacuum each hole for at least 5 minutes.
If you do not have such a nozzle, you can use a hairdryer, but the air should only be cold. Otherwise, the hot stream will damage the parts of your phone.
4. Allow to dry. Next, you need to put the phone in a deep bowl of rice for 48 hours. Rice absorbs moisture well. If after this time you find traces of moisture on your phone, leave it in the rice for another 1-2 days. If you can already say that everything is fine with him, you can try to turn it on.
If you have completed all the points, then, most likely, your phone will work.
