Modern headphones are used in conjunction with computers, telephones, mp3 players, televisions and other devices. When choosing headphones, it is important to study several important nuances in advance.
Where the headphones will be used
The choice of a suitable model strongly depends on which device the headphones will be used with. If you plan to connect headphones to the player and always carry them with you, you should pay attention to in-ear "earbuds". Unfortunately, many of them are not able to convey the full completeness of modern music. For the best sound quality in all conditions, use our over-sized active noise canceling headphones.
Types of headphones
Consider which type of mount is best for you. The following options can be distinguished:
- headphones with a headband. The cable can be connected from one or both sides;
- hook fastening. The headphones cling to the auricle. The speakers are located opposite the ear canal;
- occipital attachment. On-ear headphones, which are attached to the back of the head;
- inserts. This is a classic version of small headphones that are inserted into the auricle;
- in-channel type. Very similar to earbuds, but the headphones are held in place by a silicone (rubber) pad. The obvious advantage is high sound insulation. It is important to note that this type is not recommended for extended listening.
Specifications
The main parameters that you should pay attention to when choosing headphones are considered to be the following characteristics: sensitivity, impedance, frequency range, power and harmonic distortion.
Power is responsible for the volume of music playback. High power headphones consume more power, which will quickly drain the battery of your player or smartphone.
Many manufacturers are very fond of showing off a wide frequency range. A person is able to perceive sound in the range of 20-20000 Hz. Nevertheless, if the 15-25000 Hz parameter is indicated on the headphones, this indicates a high quality of the speakers in general.
Sensitivity is another characteristic that is responsible for the loudness of the reproduced sounds. The ideal value should be considered 95 dB or more. It is acceptable to use headphones with a lower sensitivity with a personal computer or stationary audio system.
Impedance is a priority when choosing headphones for a smartphone or mp3 player. Devices with impedance higher than 32 ohms will play very quietly, which will prevent you from enjoying music. It is better to choose headphones with an impedance of 16-32 ohms.
Headphones and headsets for home
When choosing headphones for your home, pay attention to the length and quality of the wire. To connect devices to the TV, there are special models with a cable length of more than 3.5 meters. When working at a computer, the ideal solution would be to buy a headset - headphones with a built-in microphone.
Wireless headphones
When choosing this type, two characteristics should be distinguished: the type of radio transmission and the principle of power supply. Devices with an infrared transmitter only work within the line of sight of the adapter. If you plan to listen to music while moving around the apartment, purchase headphones that work via radio or Bluetooth.
Some companies produce models with a built-in battery. An obvious plus is that there is no need to periodically change the batteries. Unfortunately, after about a year of active use, the battery capacity can be significantly reduced. You will need to plug your headphones into the docking station much more often.
Conclusion
Most importantly, be sure to try on your headphones before purchasing. Better even to spend 10-15 minutes in them. Many, even the most successful headphone models, are not suitable for certain people due to individual characteristics. Headphones should not press on the auricle, ear pads should be soft. For long-term use, it is better to choose models with a fabric finish - in them the ears will not sweat a lot.
