The speaker system connected to the TV is designed to perform one function - to improve the sound quality on the soundtrack of the movie you are watching. At the same time, it should be possible to regulate and adjust the sound quality for individual desires.
Instructions
Step 1
You can connect the speaker system to the TV in several ways: If the TV output is a mono signal, then you can connect the DVD to the TV, and the DVD output to the speakers. Such a connection is possible if the TV has an “audio-out”, and the DVD has an “input”.
Step 2
If the TV has a headphone-out jack, then audio acoustics can be connected to this jack. In this case, you need to purchase an adapter "headphones" - "tulips".
Step 3
The most ideal way to connect your speaker to your TV is to use a receiver. With this connection option, firstly, the sound quality is much better than that of the above options, and secondly, there are no difficulties in connecting the TV and the speaker system. Thirdly, when using a receiver, there is no need to think about the discrepancy between the acoustic parameters of the system.
Step 4
The ability to connect a speaker to a TV depends on the combination of the TV's audio output and the speaker's input. In different models of speaker systems, different audio inputs can be installed, so you need to know what type of cable is needed, there may be several options: - if the TV and speaker system uses the Euro system, then to connect them you need a cable 2 RCA audio ;
- if the “SCART” system is installed in the TV and in the audio system, then the “SCART-SCART” cable is used for connection;
- if the TV has “SCART”, and the audio system has an audio output “2 RCA audio”, then a “SCART-RCA” cable is used to connect the acoustics;
- if the acoustics input is "Jack 3.5 mm", and the TV output is of the type "2 RCA audio", then you need a cable for connecting TV and acoustics "Jack 3.5 mm-RCA" to connect the speaker system;
- if the TV has a "SCART" output, and the speaker system has a "2 RCA audio" input. In this case, a "SCART-3, 5 Jk + Ph 3m" cable is required.
