How To Connect The Camera To The Phone

Table of contents:

How To Connect The Camera To The Phone
How To Connect The Camera To The Phone

Video: How To Connect The Camera To The Phone

Video: How To Connect The Camera To The Phone
Video: How to Connect CCTV Camera to a Smart Phone or Tablet (HIK Vision) 2024, April
Anonim

There is no point in connecting the camera to a mobile phone. Almost all modern phones already have a built-in camera (and not even one). True, it also happens that you still need to connect the camera to the phone for some reason, and the connectors do not match. However, if your camera supports WI-FI, there will be no problems connecting to the phone.

How to connect the camera to the phone
How to connect the camera to the phone

Instructions

Step 1

Since the USB interface supports 2 data transfer standards and several types of connectors, it may happen that connecting the camera to the phone using a cable becomes impossible for this reason alone. In this case, purchase a universal cable. There are connectors on both ends of such a cable that can be connected to one of 5 adapters.

Step 2

If your camera supports WI-FI, then connecting it to the vast majority of modern phones will not be difficult: it will recognize all nearby devices. Another question if you are having difficulty setting up WI-FI directly on the camera itself.

Step 3

Assemble the wireless antenna from the supplied parts and screw it into the appropriate connector on the camera. Assemble the camera base. Connect the Ethernet cable (included in the package) to the connector on the bottom of the antenna. Connect the other end to one of the USB ports on your computer.

Step 4

Plug in the power adapter. Pay attention to the status indicator (located on the front of the antenna): it should light up red.

Step 5

Insert the installation disc into your computer's drive. If autorun did not work, click on the "Start" button, then select "Run" from the list. Type in the path in the window that appears (for example, E: …) and click "OK".

Step 6

Now in the window that appears, select the language and click Start. After the camera has been successfully detected by the program, select your camera ID from the list and click Next. Enter the IP address manually if the program was unable to recognize it.

Step 7

After that, your camera will be assigned a URL, by clicking on which you can go to the device interface and connect via WI-FI to your phone - for example, in order to transfer photos or videos.

Recommended: