A colorful sticker can not only give a unique and cute look to your phone, but also protect it from minor scratches and abrasions. There are carbon and vinyl decals, but, of course, the second type has gained the greatest popularity. Such stickers can be easily glued to the phone, and, if desired, can be quickly removed without leaving any traces.
It is necessary
- - sticker;
- - telephone;
- - tweezers
- - cotton pad;
- - a little alcohol or degreasing agent;
- - dry cloth;
- - hairdryer.
Instructions
Step 1
Clean your phone from dust and dirt. Pay special attention to buttons, camera and other notches, as debris is most likely to clog in there. Wipe the body of the device with alcohol or a drop of degreasing agent. Remove the remains of chemistry with a slightly damp cloth, and then wipe the surface dry.
Step 2
Use tweezers to pry the edge of the sticker and peel it away from the backing. Try not to touch the sticky layer if possible, but if this happens, don't worry, as this will not deteriorate the adhesive properties. According to the phone model and the selected sticker, all the holes on it have already been made. Gently remove these unwanted parts by pressing lightly on them.
Step 3
Try on the sticker slowly, but do not press it firmly against the body yet. Make sure the hole for the camera is completely aligned and does not cover it. Apply the edge of the sticker to the body, if you did this procedure crookedly, peel off and repeat the process again. The main thing is not to pull too hard during peeling off, otherwise the sticker can be deformed, and then the holes intended for the camera and keys will not be able to coincide with what they were intended for.
Step 4
When one edge fits snugly and evenly on the phone, attach the rest. Gently press down on the body in order to properly fix the position of the sticker.
Step 5
Smooth the surface with a soft cloth or tissue. This will get rid of air bubbles that have formed during the operation.
