To access the Internet from modern mobile devices, the operator's access point is used. For each service provider, the address of this point required for entering may differ, however, the procedure for setting up the Internet remains the same for all operators. To enable the access point, you need to make the appropriate settings.
Instructions
Step 1
Most modern mobile phones support automatic hotspot configuration. All data is automatically entered into the memory of your device when it is turned on, and then activated in the options. Thus, you can use the Internet immediately after purchasing the device and you do not need to enter any additional parameters. Go to your browser to test your internet connection. If the pages are loading correctly, then there is no need to make any further adjustments.
Step 2
In the event that the automatic configuration of the parameters did not occur, you will have to specify the access point data manually. Go to the parameters of your device ("Settings" - "Network" or "Data transfer") and select "Create an access point".
Step 3
In the menu that appears, specify the connection options provided by your operator. You can find them by visiting the website of your cellular service provider or by calling the customer support number.
Step 4
In the "Name" or "Profile name" field, enter an arbitrary name for your access point. In the "Start page" field, you can specify the site address of your service provider or leave the field blank. In the APN line, enter the address of the access point server, which is specified in the settings from your operator. In the Username and Password fields, enter the appropriate parameters as well. The IP address field can be left blank. If the phone requires filling in this line, enter the value 0.0.0.0. Setting up a proxy also does not require specifying any data unless instructed by the operator.
Step 5
Save your changes and reboot the device. After launch, try to launch the browser and enter the address of the resource you need. If all settings were specified correctly, the required site will be loaded. If this does not happen, check the correctness of the data specified in the settings or contact your mobile operator to determine the reasons for the inability to use the access point.
