How To Find Out The Chassis Of Your TV

Table of contents:

How To Find Out The Chassis Of Your TV
How To Find Out The Chassis Of Your TV
Anonim

If you need to find out the address of the service center of a TV manufacturer of an unknown brand or a diagram for it, first of all, information about the chassis is required. And already on it it will be possible to establish the model of the device.

How to find out the chassis of your TV
How to find out the chassis of your TV

It is necessary

  • - a computer with Internet access;
  • - Internet browser (any).

Instructions

Step 1

Many brands are not genuine manufacturers of TVs and other similar equipment. In fact, there are not as many TV manufacturers as it seems. About 90% of all televisions in the world are manufactured in China, the rest is in Turkey, Korea and Europe. The rest install ready-made boards into the case, after which they apply their logo.

Step 2

To identify the manufacturer by chassis, open the correspondence table. For example, go to the following link: https://master-tv.com/article/index.php. You need a section titled "Matching Chassis and TV Models". Next, select the brand of your TV and look at the table.

Step 3

Also look at the processor markings that indicate the firmware version. For example, the Changhong manufacturer uses a marking system in the following format: GDETxxxx-xx or CHххххххх. 3 main variants of the chassis of this manufacturer were massively imported to Russia. These are CH-16, CN-9 and CN-18.

Step 4

You may come across a chassis manufactured by Eastkit (China). Its marking looks like this: PAEXxxxx. Thus, according to these markings, you can easily find out all the information you need about the TV chassis.

Step 5

Konka manufactures chips on its own, and the marking looks something like this: CKPxxxxx (CKP1001S, CKP1002S and the like).

Step 6

For Skyworth, typical chassis names are, for example, 5S01, 5P60. Here the second letter denotes the chip on the basis of which the chassis is made.

Step 7

Another way to recognize the chassis of a TV is to identify it by the logo on the printed circuit board. Usually, the manufacturer's logo is applied to it using white paint. For example, if the board shows something that looks like a rocket with an oval in the background, then it is Changhong.

Recommended: