How To Connect Long Distance

Table of contents:

How To Connect Long Distance
How To Connect Long Distance

Video: How To Connect Long Distance

Video: How To Connect Long Distance
Video: How to Setup Long Distance Wireless Internet | Litebeam M5 2024, May
Anonim

Today, you can connect to long distance communication without leaving your home. To connect to the Intercity network and configure the SIP gateway, you will need an analog phone, a voice gateway and Internet access.

How to connect long distance
How to connect long distance

Instructions

Step 1

Remove the gateway and all necessary cables to connect the device from the box.

Step 2

Register on the site www.mezhgorod.info. Get a login and password to connect

Step 3

Connect the voice gateway port (labeled L1) to the Ethernet port on your computer using a network cable (included with the voice gateway).

Step 4

Configure your computer to work correctly with the gateway. Click "Start" and select "Control Panel" from the list. In the "Control Panel" select the "Network Connections" menu.

Step 5

Hover over the Local Area Connection tab. Right-click the Properties menu. In the window select "Internet Protocol TCP / IP" and then - "Properties". In the window, select "Obtain an IP address automatically", and then - "Obtain DNS server address automatically". Click OK.

Step 6

After all these steps, the computer will automatically receive its IP address from the gateway. Open your browser, type in the address bar https://192.168.8.254 (IP-address of the "Intercity" network) for authorization. Once on the page, click Login. On the default page, access to the SIP gateway settings is open

Step 7

Configure the WAN network to connect the voice gateway to the Internet. Select the Network Settings tab in the Basic Settings section. Specify authorization information and connection type in this menu (in this case, “Static IP” is indicated). Click the Accept button.

Step 8

If you are using a dynamic IP address, select the NAT / DDNS tab in the Basic Settings section. In this menu, check Enable STUN Client. At the STUN Server IP / Domain line, type stun.fwd.net. Then click the "Accept" button.

Step 9

In the "Basic Settings" section, select the "SIP Settings" tab. Check Proxy Server / Soft Switch in this menu as SIP support. Then enter the SIP Domain and IP Proxy Server / Domain address - 80.76.135.2 in the field. Enter your username and password received during registration on the site www.mezhgorod.info, in the field “FXO Representative Number”. Click the Accept button.

Recommended: