Many people would like to watch 3D movies without going to the cinema. This possibility is quite feasible in the presence of certain equipment. Naturally, you need to properly configure and use it.
Necessary
- - 3D glasses;
- - 3D monitor;
- - TV with 3D function.
Instructions
Step 1
Select the display on which you will watch 3D movies. If you want to use a computer monitor for this purpose, then purchase equipment that supports the transmission of 3D images. They cost a little more than conventional 2D monitors.
Step 2
Remember that you need a powerful enough computer to watch high definition movies. Pay special attention to the video card. This device must support the 3D transmission function. Almost all modern video adapters are suitable for this process. Connect the monitor to the system unit using the DVI or HDMI channel. Please note that only analog signal can be transmitted via the VGA (D-Sub) port.
Step 3
Turn on 3D mode in monitor settings. Install a suitable player and run the desired file. Put on the pre-prepared 3D glasses. Be sure to check that this accessory is suitable for use with the selected monitor
Step 4
If you do not want to purchase an additional display for your computer, but you have a TV with the function of displaying 3D images, then use it. Connect it to the video card using the above channels.
Step 5
Turn on the TV and select the video source by the port to use. Switch the TV mode to enable the device to process 3D images. If you use the TV at the same time as the monitor, then adjust the settings for their collaboration.
Step 6
Usually, 3D glasses are sold with certain TV models. If you do not have this accessory, then purchase the required number of glasses, after making sure that they are compatible with your TV model. You can also use the Blue-Ray player to watch 3D movie discs if you don't want to connect your TV to your PC.
