To connect the phone display to your computer, you need to be familiar with similar operations for connecting LCD devices, since otherwise you can simply damage both the screen and the connection wire. Please note that it is best to use the special commercially available color LCD panels for this.
Necessary
- - phone screen;
- - vga cable;
- - connection diagram;
- - skills in working with controllers.
Instructions
Step 1
Examine the pinout of the fifteen-pin VGA cable that is used to connect the monitor to the video adapter. The first contact corresponds to the red video, the second to the green video, the third to the blue video, the fourth to the two-bit monitor identifier, the fifth to the common contact, the sixth to the red common, the seventh to the green common, the eighth to the blue common, the ninth is the key without the leg, the tenth - common for synchronization, eleventh is monitor connection identifier bit0, twelfth is monitor identifier bit1, thirteenth is for composite sync, fourteenth is vertical sync, and fifteenth is monitor bit3 identifier.
Step 2
Next, examine the contacts for connecting the phone display to these contacts. If you do not have a wiring diagram, it is best to download it from the Internet by searching the appropriate forums. Please note that the sequence may also be different for different phone screens. Check out the features of the matrix.
Step 3
If you cannot accurately determine the connection parameters for your display, it is best to find special small panels at the points of sale of radio equipment to connect them to devices, they usually include a connection cable, and instructions, and a diagram. Also, their various variations can be ordered by mail or in the online store.
Step 4
If you find a suitable diagram for connecting devices, follow it to connect the phone display to your computer, connecting it to the motherboard or other device. Note that if this is your first time doing this, ask someone more familiar with the topic to help you so you don't ruin your computer. This is best done if you have replacement equipment.
