PSP firmware is to replace the official firmware with a modified one released by third-party programmers. Earlier versions of the set-top boxes were reprogrammed using the Pandora kit. The kit itself is a specially prepared battery and memory card.
It is necessary
- original battery;
- original memory card;
- the prefix itself;
- a computer;
- card reader.
Instructions
Step 1
Download and install the PSP Pandora Deluxe v1.1 software on your computer to any free space on your hard drive. Do not forget that the program only works with the NET Framework 2.0 package, if it is missing, install it. Insert the memory card into the card reader and wait for it to be detected. Download the official firmware 4.01. Run the installed program as administrator. In the program window, you will see the Load 4.01 Firmware tab, click on it and indicate where the official firmware is located, then check the Install box next to it. In the same window, check the Despertar Cementerio v7 item, go down below, in the window located in the center, set the UP value. Press the start button - the program will start creating the "Pandora" map.
Step 2
You will also need to create a Pandora Battery. To do this, you need to find an already flashed PSP, since the program for creating the necessary battery works only on modified consoles, download the Hellcat Pandora Installer program. Unpack the archive with the program to any place convenient for you. Copy the contents of the pan3xx folder from the archive to the / PSP / GAME / directory on the memory card.
Step 3
Run the program from the console menu. Select the third item from the bottom called Battery Options. A blue screen and a menu will appear in which you need to select the first item make battery Pandora. Exit the program. To use the Pandora set, turn off the set-top box and remove the battery. Insert the Pandora card into the set-top box and, while holding the button up, insert the battery. If everything is done correctly, the console will turn on and the "Pandora" menu will appear on the screen. To install the modified firmware, click Install 4.01 M33, after finishing click the cross.
