If you are planning to mount your TV on the wall, you should approach this matter as responsibly as possible. If the installation of the product is performed poorly, the TV may fall at any time.
It is necessary
Construction plumb line, hammer drill, building level
Instructions
Step 1
First of all, you need to make accurate markings for the subsequent installation of the fixing element that will hold the TV on the wall. To do this, take a construction plumb line and mark a vertical line with a pencil. This is necessary for the correct installation of the bracket (if it is unevenly fixed, then the TV itself will be installed obliquely). Place the bracket exactly at the center of the line and mark the holes for subsequent drilling. Most modern TV models provide the ability to rotate the bracket after fixing it, in this case, vertical markings are optional.
Step 2
Now you need to drill holes in the wall. To do this, select a drill, the diameter of which will be 1 millimeter less than the diameter of the dowel (the dowels are included with the product). Drill holes in the wall, and, placing the bracket on them, drive the dowels into the wall. Make sure the structure is securely fixed and that the base is stationary. Only then can you start hanging the TV.
Step 3
The product is hung using the groove-in-groove method. If the bracket is rotatable, you can align the TV to a perfect horizontal line. To do this, place a building level on the TV and adjust the position of the product until you get the optimal result.
