High technologies come to the aid of car owners in an emergency. You can control the security functions of the alarm using your mobile phone. However, for this you need to install a special GSM alarm or connect a GSM module.
Necessary
- - mobile phone;
- - gsm alarm.
Instructions
Step 1
GSM-signaling makes it possible to control security functions and additional channels of the system via mobile communication. Wherever you are, you can call the alarm unit and give a command, for example, start the car or listen to see if there were any triggers from a blow or opening. Such a system is convenient, first of all, because the range of the signaling is limited only by the coverage of the mobile communication area. While conventional security systems with two-way communication have a range of up to 500 m. With the help of a GSM alarm system, you can open the car doors if you have forgotten the keys in the passenger compartment. Commands to open / close doors are given by phone call, sms or special manipulations (depending on the alarm model).
Step 2
If the car is equipped with the Elita GSW GSM module, call the system number to open / close the doors. Hang up the handset within 7 seconds after the first beep. The system recognizes your signal and disarms the car - opens the central locking if one-stage disarming is programmed. If, when the call was made, the car was not armed, the system will perform the opposite action - it will set the car on the alarm. If you do not have time to hang up after 7 seconds, a connection will be made to the system.
Step 3
If the car is equipped with a Starline M20 / M30 GSM module, call the system phone or send a message with a command. By calling the module phone, in the tone mode, dial the secret command code that you set when programming the alarm. Each command has its own code. You can send an sms, which will also contain a command code for opening doors or disarming the system.
